If you want to solve the Reactor puzzle in DERELIKT, then you need to select hexagonal rods in the correct order so that they can build up enough heat and trigger a reactor meltdown. You can only select the COLD (off) and WARM (red) hexagons, while HOT (yellow) hexagons cannot be selected. Each selection changes the heat level of the surrounding hexagons, so choosing the wrong rod can make the puzzle confusing.
I spent nearly 3 hours figuring out the correct sequence for this puzzle. If you’re also stuck, follow the steps below to complete the DERELIKT reactor puzzle without wasting time experimenting with different combinations.
How the DERELIKT Reactor Puzzle Works
Before entering the solution, you need to understand how the hexagons change when you select them.
There are three heat states:
- COLD (Off): The hexagon is not heated.
- WARM (Red): The hexagon has started heating up.
- HOT (Yellow): The hexagon has reached its highest heat level and cannot be selected.
Every time you select an available hexagon, it changes the heat propagation of the surrounding hexagons. The heat states follow this cycle:
COLD → WARM → HOT → COLD
Your objective is to select the rods in the correct order and generate as much heat as possible until the reactor reaches a meltdown.

DERELIKT Reactor Puzzle Solution
The puzzle starts with a fixed arrangement of COLD, WARM, and HOT hexagons. You can reset it by pressing the R button at any time if you make a mistake.

Follow the selection sequence in the correct order. The puzzle progresses through several patterns before reaching the final solution.
Step 1: Follow the First Selection Sequence
Press the following Hexagon numbers in the correct sequence as shown below.
- 10C1 – bottom row
- 10C1 – top row
- 10A2 – left column
- 10A2 – right column

This will change the heat distribution across the board, and you’ll get this pattern.

Step 2: Follow the Second Selection Sequence
Now, select the next set of hexagons in this order.
- 10C2 – top row
- 10C2 – bottom row
- 10C1 – bottom row
- 10C1 – top row

If you have pressed the hexagons in the correct order, the puzzle will look like this.
Now you have to press:
- 10C3 – middle
- 10C1 – top row
- 10C1 – bottom row

Once done, the reactor will reach a meltdown, and the puzzle will be solved.


